Dobatkin Sergey Vladimirovich
1975 – Qualification: Engineer-Metallurgist, specialty: "Physics of Metals". Graduated from the Physics and Chemistry Department of Moscow Institute of Steel and Alloys (MISA).
1979 - Thesis for the degree of Cand. Sci. (engineering) in “Physical metallurgy and heat treatment of metals", MISA.
1990 - Thesis for the degree of Doct. Sci. in “Physical metallurgy and heat treatment of metals", MISA.
1991 - Professor of MISA (0.5 rate).
2008 - Full Professor of the Department of Physical Metallurgy and Physics of Strength MISA.
 
Research interests: materials science, physics of metals and physical metallurgy, phase and structural transformations, plastic deformation, thermomechanical treatment, nano- and submicrocrystalline materials, methods of severe plastic deformation.

Training courses:

  • Lectureship on training courses "Materials science of special alloys" and "Bulk nanomaterials”.

Main publications: 

  • M.L. Bernshtein, S.V.Dobatkin, L.M. Kaputkina, S.D. Prokoshkin. Diagramms of Hot Deformation, Structure and Properties of Steels. M., “Metallurgy”, 1989, 544 p. (in Russian).
  • S.S. Gorelik, S.V.Dobatkin, L.M. Kaputkina. Recrystallization of Metals and Alloys. M.: MISIS. 2005. 432 p. (in Russian).
  • S.V.Dobatkin, L.M. Kaputkina. Maps of Structure States for Optimization of Hot Deformation Schedules of Steels. Physics of Metals and Physical Metallurgy, Vol. 91, № 1, 2001, pp.79-89. (in Russian).
  • N.P. Lyakishev, M.I. Alymov, S.V.Dobatkin. Bulk Structural Nanomaterials. Metals. №3, 2003, pp.3-16. (in Russian).
  • S. Dobatkin, X. Sauvage. Bulk Nanostructured Multiphase Ferrous and Nonferrous Alloys, in: Bulk Nanostructured Materials (eds. M.J. Zehetbauer and Y.T. Zhu), 2009, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, pp. 571-603.

Main Textbooks: 

  1. Kaputkina LM, Prokoshkin SD, Dobatkin SV, Shtremel MA, Plastic deformation and phase transformations. Section: Transformations under load. Laboratory workshop. Moscow, MISA, 1997, 136 p.
  2. Kaputkina LM, Prokoshkin SD, Dobatkin SV, Prokoshkin VG, Trusov VA, "Structure and properties of metals. Physical basis of plastic deformation. Textbook. Workshop No. 18/19, Moscow, MISA, 2003, 36 p.
  3. VY Turilina, SV Dobatkin. Materials Science and Heat Treatment. Textbook No. 654, Moscow, MISA, 2005, 77 p.
  4. SD Prokoshkin, IY Chmielewska, EP Ryklina, VY Turilina, SV Dobatkin, VG Prokoshkin. Ultrafine-grained shape memory alloys Textbook, Moscow, MISA, 2006, 40 p.
  5. SV Dobatkin. Bulk metallic nano-and submicrocrystalline materials obtained by severe plastic deformation. Textbook. Moscow, MISA, 2007, 38 p.
  6. IV Blinkov, SV Dobatkin, DV Kuznetsov, MR Filonov, AO Volkhonsky. Processes of the preparation of nanoparticles and nanomaterials, nanotechnologies. Laboratory workshop. - M.:Ed. House MISA, 2010, 36 p.

List of projects over five years: 

  1. ISTC project No. 2398 "Development of advanced nanostructured metallic materials using severe plastic deformation", 2002-2006 (project leader in MISA).
  2. ISTC project No. 2114 "Production of Ti-6V-4Al and Ti-Ni shape memory nanostructured alloys for medical applications", 2003-2006 (project leader in MISA).
  3. Contract with the General Motors corporation: "Development of a continuous shear process for obtaining aluminum alloy sheets with UFG structure." 2003-2006. Head of research.
  4. Project No. 42 - NT24 (Annex 3) of the Executive Program of the Russian-Italian Commission for Scientific - Technical Cooperation “Development and use of nanostructured materials, including shape-memory alloys".2002-2006. Head of research.
  5. State contract No. 02.513.11.3141 within FCP on "Preparation and investigation of nano- and submicrocrystalline high-strength aluminum and magnesium alloys", 2007. Head of research.
  6. Economic agreements with USATU (Ufa), "Development of methods for obtaining bulk nanostructured metallic materials for innovative applications" under the State contract No. 02.527.11.9019 to implement integrated project "R&D in cooperation with foreign scientific organizations, the Czech Republic, on the priority directions of the Program" under the Federal Program "Research and development on priority directions of scientific-technological complex of Russia for 2007-2012" (activity 2.7 - VIII turn, Lot 3, code 2007-9-2.7-00-34). Project leader in MISA. 2007-2008.
  7. RFBR 05-03-32673-A "Preparation of bulk nanostructured aluminum alloys containing rare earth and transition elements" 2005 – 2006. Head of research.
  8. RFBR 06-08-00494-a, "Development of scientific bases of pack rolling using severe plastic deformation in regimes of thermomechanical processing for the manufacture of sheets (including automobile ones) with ultrafine (nano-) structure", 2006 -2008. Executor.
  9. RFBR 06-03-42516-W "Participation in the IV-th International Symposium on Ultrafine-Grained Materials, San Antonio, USA, 2006.
  10. RFBR 07-03-00342-A "Preparation of high-strength thermally stable ultrafine-grained low-carbon steels by severe plastic deformation", 2007 -2009. Head of the project.
  11. Project "Preparation of bulk nano- and submicrocrystalline aluminum and magnesium alloys containing rare earth elements by the methods of severe plastic deformation" of a Complex Program of the Presidium of Russian Academy of Sciences, P-8, "Development of methods for preparation of chemical substances and development of new materials" (subprogram "Fundamental problems of physics and chemistry of nanoscale systems and nanomaterials"). 2006-2010. Head of research.
  12. State contract No. 02.513.11.3340 under the Federal program "Texture and plastic anisotropy of magnesium nanomaterials”, 2007-2008. Executor.
  13. Economic agreements with the Institute of Metal Physics, UB RAS (Ekaterinburg) under the State Contract No. 02.513.11.3197 under the Federal Program "Development, preparation and comprehensive study of high-strength structural and functional metallic alloys with nanophase or nanostructured strengthening", Head of research, 2007-2008.
  14. State contract No. 8/3-433n-07 on November 16, 2007 with the Department of Scientific and Industrial Policy of Moscow for R&D "Manufacture of Ti-Ni based bulk nanostructured shape memory alloys with high power functional characteristics for use in medicine and engineering”, Head of research, 2007-2008.
  15. RFBR No. 08-03-08362-z. “Participation in the 4th International Conference on Nanomaterials prepared by severe plastic deformation (NanoSPD4)”. 2008.
  16. RFBR No. 08-03-90020-Bel_a. “Preparation of high ultrafine zirconium alloy for medical use”. 2008-2009. Executor.
  17. RFBR No. 10-03-08266-z. “Participation in 1-st TMS-ABM International Materials Congress”. 2010.
  18. RFBR No. 11-03-08014-W. “Participation in the 5th International Conference on Nanomaterials by severe plastic deformation (NanoSPD5)”. 2011.
  19. RFBR No. 10-08-00594-a. “Development of scientific foundations of obtaining ultrafine copper alloy for high-current electrical contacts and electrodes with high thermal, heat resistant and operating characteristics”. 2010-2012. Executor.
  20. RFBR No. 10-03-00996-a. “Mechanisms controlling the structure and phase composition of ultrafine-grained austenitic stainless steels to improve the physical, chemical, mechanical, and service properties”. 2010-2012. Head of research.

List of Publications during 2006-2010: 

Papers in periodic journals:
2010
 
  • 1.J. Cizek, M. Janecek, O. Srba, R. Kuzel, Z. Barnovska, I. Prochazka, S. Dobatkin.Evolution of defects in copper deformed by high-pressure torsion. Acta Materialia 59 (2011) 2322–2329.
  • J. Gubicza, S.V. Dobatkin, E. Khosravi, A.A. Kuznetsov, J.L. Labar. Microstructural stability of Cu processed by different routes of severe plastic deformation.Materials Science and Engineering A 528 (2011) 1828–1832.
  • A. A. Mazilkin, G. E. Abrosimova, S. G. Protasova, B. B. Straumal, G. Schutz, S. V. Dobatkin, A. S. Bakai. Transmission electron microscopy investigation of boundaries between amorphous ‘‘grains’’ in Ni50Nb20Y30 alloy. J Mater Sci. DOI 10.1007/s10853-011-5304-3.
  • B.B. Straumal, A.O. Rodin, A.L. Petelin, B. Baretzky, S.G. Protasova, S.V. Dobatkin, J. Dutta Majumdar, I. Manna. Grain Boundary Segregation and Amount of Bulk Carbides in Severely Deformed Fe–C Alloys. Defect and Diffusion Forum Vols. 309-310 (2011) pp 51-62.
  • B. B. STRAUMAL, A. A. MAZILKIN, S. G. PROTASOVA, D. GOLL, B. BARETZKY, S. BAKAI, S. V. DOBATKIN. Formation of two amorphous phases in the Ni60Nb18Y22 alloy after high pressure torsion. Vol. 49 (2011), no. 1, pp. 17 – 22.
  • V. F. TERENTEV, S. V. DOBATKIN, S. A. NIKULIN, V. I. KOPYLOV, D. V. PROSVIRNIN, S. O. ROGACHEV, I.O. BANNYKH. Fatigue strength of submicrocrystalline Ti and Zr-2.5%Nb alloy after equal channel angular pressing. Vol. 49 (2011), no. 1, pp. 65 – 73.
  • S. Dobatkin, J. Zrnik, S. Nikulin,T. Kovarik. Strength and ductility of medium carbon steel after equal channel angular pressing. Journal of Physics: Conference Series 240 (2010) 012127.
  • J. Gubicza, S.V. Dobatkin, E. Khosravi. Reduction of vacancy concentration during storage of severely deformed Cu. Materials Science and Engineering, A 527 (2010), p. 6102–6104.
  • J. Zrnik, S. Dobatkin, G. Raab, L. Kraus. Ultrafine Grained Structure Formation in Low Carbon Steel Processed by SPD. Materials Science Forum Vols. 654-656 (2010), pp 1223-1226.
  • M. Dopita, M. Janecek, R. Kuzel, H. J. Seifert, S. Dobatkin. Microstructure evolution of CuZr polycrystals processed by high-pressure torsion. Journal of Materials Science, 2010, 45, p. 4631–4644.
  • S. Dobatkin, Y. Estrin, V. Zakharov, T. Rostova, O. Ukolova, A. Chirkova. Structure, Strength and Ductility of As-Cast Al-Mg-Mn-Zr-Sc Alloys after Equal Channel Angular Pressing. Materials Science Forum Vols. 633-634 (2010) pp 311-319.
  • V.N. Serebryany, S.V. Dobatkin, V.I. Kopylov, D.I. Nikolayev, H-G. Brokmeier. Texture, Microstructure and Ductility of Mg-Al-Zn Alloy after Equal Channel Angular Pressing. Materials Science Forum Vols. 633-634 (2010) pp 365-372.
  • V.N. Serebryany, T.M. Ivanova, T.I. Savyolova, S.V. Dobatkin. Effect of Texture on Tensile Properties of an ECA Processed MA2-1 Magnesium Alloy. Solid State Phenomena Vol. 160 (2010) pp 159-164.
  • S. Dobatkin, J. Zrnik, I. Mamusic. Development of SPD Continuous Processes for Strip and Rod Production. Metalurgija, Vol.49, № 4, p. 343-347.
2009
  • S. Dobatkin, X. Sauvage. Bulk Nanostructured Multiphase Ferrous and Nonferrous Alloys, in: Bulk Nanostructured Materials (eds. M.J. Zehetbauer and Y.T. Zhu), 2009, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, pp. 571-603.
  • J. Gubicza, N.Q. Chinh, J.L. Labar, S. Dobatkin, Z. Hegedus, T.G. Langdon. Correlation between microstructure and mechanical properties of severely deformed metals. Journal of Alloys and Compounds, Vol. 483, (2009), pp.271-274.
  • C. Xu, S.V. Dobatkin, Z. Horita, T.G. Langdon. Superplastic flow in a nanostructured aluminum alloy produced using high-pressure torsion. Materials Science and Engineering A, Vol. 500, 2009, pp.170-175.
  • B.B. Straumal, A.A. Mazilkin, S.G. Protasova, S.V. Dobatkin, A.O. Rodin, B. Baretzky, D.Goll, G.Schutz. Fe-C nanograined alloys obtained by high pressure torsion: Structure and magnetic properties. Materials Science and Engineering A, Vol. 503, 2009, pp.185-189.
  • S.Dobatkin, J.Zrnik, I.Mamuzic. Mechanical and service properties of low carbon steels processed by severe plastic deformation. Metalurgija (Metallurgy), Vol.48, No.3, pp. 157-160.
  • S. Dobatkin, Y. Estrin, V. Zakharov, T. Rostova, O. Ukolova, A. Chirkova. Improvement in the strength and ductility of Al–Mg–Mn alloys with Zr and Sc additions by equal channel angular pressing. International Journal of Materials Research (formerly Z. Metallkd.) 100, (2009), 12, pp.1-8.
2008
  • I.Khmelevskaya, S.Prokoshkin, V.Brailovski, K.Inaekyan, V.Demers, I.Gurtovaya, A.Korotitskiy, S.Dobatkin. Functional Properties of Ti-Ni-Based Shape Memory Alloys. Advances in Science and Technology, Vol. 59, (2008), pp. 156-161.
  • S.G. Protasova, B.B. Straumal, S.V. Dobatkin, D.Goll, G.Schutz, B. Baretzky, A.A. Mazilkin, A.N. Nekrasov. Coercivity and domain structure of nanograined Fe–C alloys after high-pressure torsion. Journal of Materials Science, (2008), 43, pp.3775–3781.
  • A.A. Mazilkin, B.B. Straumal, S.G. Protasova, S.V. Dobatkin, B.Baretzky. Structure, phase composition and microhardness of carbon steels after high-pressure torsion. Journal of Materials Science, (2008), 43, pp.3800–3805.
  • J. Gubicza, S. Dobatkin, Z. Bakai, N.Q. Chinh, T.G. Langdon. Microstructure and mechanical behavior of severely deformed f.c.c. metals. Materials Science Forum Vols. 567-568, (2008), pp.181-184.
  • Yu.D. Yagodkin, S.V. Dobatkin. Application of Electron Microscopy and X-Ray Structural Analysis for the Determination of Sizes of Structural Elements in Nanocrystalline Materials (Review). Inorganic Materials, 2008, Vol. 44, No.14, pp. 43–53.
  • S.Dobatkin, J.Zrnik, I.Mamuzic. Ultrafine-grained low carbon steels by severe plastic deformation. Metalurgija (Metallurgy), Vol.47, No.3, pp. 181-186.
  • J.Zrnik, S.Dobatkin, I.Mamuzic. Processing of metals by severe plastic deformation (SPD)-structure and mechanical properties respond. Metalurgija (Metallurgy), Vol.47, No.3, pp. 211-216.
  • S.V.Dobatkin, Y.Estrin, L.L.Rokhlin, M.V.Popov, R.Lavopok, T.V.Dobatkina, V.N.Timofeev, N.I.Nikitina. Structure and Properties of Mg-Al-Ca Alloy after Severe Plastic Deformation. Materials Science Forum, 2008, Vol. 584-586, pp.559-564.
  • V.N. Serebryany, M.V. Popov, A.S. Gordeev, V.N. Timofeev, L.L. Rokhlin, Y. Estrin, S.V. Dobatkin. Effect of Texture and Microstructure on Ductility of Mg-Al-Ca alloy Processed by ECAP. Materials Science Forum, 2008, Vol. 584-586, pp.375-379.
  • A.M.Glezer, S.V.Dobatkin, M.R.Plotnikova, A.V.Shalimova. Severe plastic deformation of amorphous alloys. Materials Science Forum, Vols. 584-586, 2008, pp. 227-230.
  • L.R. Botvina, M.R. Tyutin, V.P. Levin, Y.A. Demina, I.A. Panteleev, S.V. Dobatkin. Specific Features of Static, Impact and Fatigue Fracture of the 0.09%C-0.08%Mo-0.03%Nb-0.06%V Steel with Ultrafine-Grained Structure. Materials Science Forum, Vols. 584-586, 2008, pp 281-286.
  • S.V. Dobatkin, P.D.Odessky, S.V.Shagalina. Ultrafine Grained Low Carbon Steels Processed by Severe Plastic Deformation. Materials Science Forum, Vols. 584-586, 2008, pp 623-630.
  • E.G. Astafurova, S.V. Dobatkin, E.V. Naydenkin, S.V.Shagalina, G.G. Zakharova. Microstructural Characterization of Low-Carbon Steel Processed by High Pressure Torsion and Annealing. Materials Science Forum. Vols. 584-586, 2008, pp 649-654.
  • S.A. Nikulin, V.G. Khanzhin, S.V. Dobatkin, V.V.Zakharov,V.I. Kopylov, T.D.Rostova, S.A. Rogachev. Study of Deformation and Fracture of Submicrocrystalline Aluminum Alloys by Acoustic Emission Method. Materials Science Forum, Vols. 584-586, 2008, pp 870-875.
  • I.S. Tereshina, G.S. Burkhanov, S.V. Dobatkin, O.D. Chistyakov, E.A. Tereshina, H. Drulis. Magnetic Parameters of R2Fe14B Compounds with Nanograin Structure. Materials Science Forum, Vols. 584-586, 2008, pp 950-954.
  • J. Gubicza, N.Q. Chinh, J.L. Labar, S. Dobatkin, Z. Hegedus, T.G. Langdon. Correlation between microstructure and mechanical properties of severely deformed metals. Journal of Alloys and Compounds, Vol. 167, (2008), pp.283-286.
  • Khmelevskaya IY, Prokoshkin SD, Trubitsyna IB, Belousov MN, Dobatkin SV, Tatyanin EV, Korotitskiy AV, Brailovski V, Stolyarov VV, Prokofiev EA. Structure and properties of ti-ni-based alloys after equal-channel angular pressing and high-pressure torsion. Materials Science and Engineering A 2008;481-482(1-2 C):119-122.
  • Prokoshkin SD, Brailovski V, Inaekyan KE, Demers V, Khmelevskaya IY, Dobatkin SV, Tatyanin EV. Structure and properties of severely cold-rolled and annealed ti-ni shape memory alloys. Materials Science and Engineering A 2008;481-482(1-2 C):114-118.
2007
  1. J.Zrnik, I.Mamuzic, S.V.Dobatkin, Z.Stejskal, L.Kraus. Low carbon steel processed by equal channel angular warm pressing. Metalurgija (Metallurgy), Zagreb, Croatia, Vol.46 (2007) No.1, p.21-27.
  2. A.A.Aleshin, A.M.Arsenkin, S.V.Dobatkin. Study of Grain Growth Kinetics in Submicrocrystalline Armco-Iron. Materials Science Forum, Vol. 550 (2007) pp.465-470.
  3. S.V. Dobatkin, G.A.Salishchev, A.A. Kuznetsov, T.N.Kon’kova. Submicrocristalline Structure in Copper after Different Severe Plastic Deformation Schemes. Materials Science Forum, Vols. 558-559 (2007) pp.189-194.
  4. J.Zrnik, S.V.Dobatkin, L.Kraus. Influence of Thermal Condition of ECAP on Microstructure Evolution in Low Carbon Steel. Materials Science Forum, Vols. 558-559 (2007) pp.611-616.
  5. S.V. Dobatkin, O.V. Rybal’chenko, G.I. Raab. Structure formation, phase transformations and properties in Cr–Ni austenitic steel after equal-channel angular pressing and heating, Materials Science and Engineering, A 463, 2007, p. 41–45.
  6. J. Zrnik, S. V. Dobatkin. Development of ultrafine grained structure in low carbon steel by ECAP at increased temperatures. JOM, 59, February 2007, 2, 112.
  7. J. Zrnik, S.V. Dobatkin, O. Stejskal. Deformation behaviour and ultrafined grained structure development in steels with different carbon content subjected to severe plastic deformation. Journal of Key Engineering Materials, Vols. 345-346 (2007) 45-48.
  8. J. Zrnik, S.V. Dobatkin, T.Kovarik. Ultrafine grain structure development in steels with different carbon content subjected to severe plastic deformation. Acta Metallurgica Slovaka, 13, 2007, pp.11-17.
  9. V. Demers, V. Brailovski, S. Prokoshkin, K Inaekyan, E. Bastarash, I. Khmelevskaya, S. Dobatkin. Functional properties of nanostructured Ti-50.0 at%Ni alloy. ASTM Special Technical Publication, 2007, v. 1481, STP, p. 34-44.
2006
 
  • S.V.Dobatkin, V.V.Zakharov, L.L.Rokhlin. Specific Features of the Strengthening During Severe Plastic Deformation of Supersaturated Solid Solutions. Materials Science Forum.Vols.503-504 (2006), pp. 399-406.
  • L.L. Rokhlin, S.V. Dobatkin, T.V. Dobatkina, N.I. Nikitina , M.V.Popov. Effect of Severe Plastic Deformation on the Structure and Properties of the Age-Hardenable Mg-Sm Alloys. Materials Science Forum.Vols. 503-504 (2006), pp. 961-966.
  • S.D.Prokoshkin, I.Yu.Khmelevskaya, S.V.Dobatkin, E.V.Tatyanin, I.B.Trubitsyna. Studies of Severe Plastic Deformation Conditions for Amorphous and Nanocrystalline Structures Formation in Ti-Ni Based Alloys. Materials Science Forum.Vols. 503-504 (2006), pp. 481-486.
  • K.E.Inaekyan, S.D.Prokoshkin, V.Brailovski, I.Yu.Khmelevskaya, V.Demers, S.V.Dobatkin, E.V.Tatyanin, E.Bastarache. Substructure and Nanocrystalline Structure Effects in Thermomechanically Treated Ti-Ni Alloys. Materials Science Forum.Vols. 503-504 (2006), pp. 597-602.
  • A.Vinogradov, T.Suzuki, S.Hashimoto, K.Kitagawa, A.Kuznetsov, S.Dobatkin. Structure and Mechanical Properties of Submicrocrystalline Copper Produced by ECAP to Very High Strains. Materials Science Forum.Vols. 503-504 (2006), pp. 971-976.
  • S.V.Dobatkin, J.Zrnik, I.Mamuzic. Nanostructures by severe plastic deformation of steels: advantages and problems. Metalurgija (Metallurgy), Zagreb, Croatia, Vol.45 (2006) No.4, p.313-321.
  • J.Zrnik, I.Mamuzic, S.V.Dobatkin. Recent progress in high strength low carbon steels. Metalurgija (Metallurgy), Zagreb, Croatia, Vol.45 (2006) No.4, p.323-331.
  • V.Brailovski, S.D.Prokoshkin, I.Yu. Khmelevskaya, K.E.Inaekyan, V.Demers, S.V.Dobatkin, E.V.Tatyanin. Structure and Properties of the Ti-50.0%Ni Alloy after Strain Hardening and Nanocrystallizing Thermomechanical Processing. Materials Transactions, Vol.47, No.3 (2006) pp.795-804.
  • S.V. Dobatkin, J.A. Szpunar, A.P. Zhilyaev, J.-Y. Cho, A.A. Kuznetsov. Effect of the route and strain of equal-channel angular pressing on structure and properties of oxygen-free copper. Materials Science and Engineering A 418 (2006), pp.148-156.
  • V.Demers, V.Brailovski, S.Prokoshkin, K.Inaekyan, E.Bastarash, I.Khmelevskaya, S.Dobatkin. Functional properties of nanostructured Ti-50.0at.% Ni alloys. Journal of ASTM International, 2006, v.3, No.6, pp. 28-36.
  • I.Y.Khmelevskaya, S.D.Prokoshkin, V.Dobatkin, E.V.Tatyanin, I.B.Trusitsyna. Studies of composition, deformation temperature and pressure effects on structure formation in severely deformed TiNi-based alloys. Mater. Sci. Eng. A, 2006, v.438-440, p.472-475.
  • V.Brailovski, S.Prokoshkin, I.Khmelevskaya, K.Inaekyan, V.Demers, S.Dobatkin, E.Tatyanin, “Interrelations Between the Properties and Structure of Thermomechanically-Treated Equiatomic Ti-Ni Alloy”, Mater. Sci. Eng. A, 2006, v.438-440, p.597-601.
  • V.Demers, V.Brailovski, S.Prokoshkin, K.Inaekyan, E.Bastarash, I.Khmelevskaya, S.Dobatkin, "Functional Properties of Nanostructured Ti-50.0at%Ni Alloy", Journal of ASTM International (JAI), V.3, No.6, March 2006.
Abstracts:
 
2010
 
  • S. Dobatkin, V. Serebryany, J. Zrnik. Structure, Texture and Mechanical Properties of Copper and a Mg-Al-Zn-Mn Alloy after Constrained Groove Pressing. Abstracts of the Sixth International Symposium on Ultrafine Grained Materials. 139-th Annual TMS Meeting, February 14-18, 2010, Seattle, Washington, USA, p. 131.
  • S. Dobatkin, J. Zrnik, I. Mamuzic. Development of SPD Continuous Processes for Strip and Rod Production. Summaries of lectures of 9th International Symposium of Croation Metallurgical Society. Sibenik, Croatia, June 20-24, 2010 / Metallurgija, 2010, Vol.49, №3, P.195.
  • V.V. Milyavskiy, T.I. Borodina, O.P. Chernogorova, S.V. Dobatkin, E.I. Drozdova, G.E. Valino. Shock response of fullerites as a background for Al-fullerite composites preparation. Summaries of lectures of 9th International Symposium of Croation Metallurgical Society. Sibenik, Croatia, June 20-24, 2010 / Metallurgija, 2010, Vol.49, №3, P.212.
  • A.Aronin, G. Abrosimova, S. Dobatkin, D. Matveev, O. Rybchenko. Phase Transformation in Amorphous Alloys under Severe Plastic Deformation. Summaries of lectures of 9th International Symposium of Croation Metallurgical Society. Sibenik, Croatia, June 20-24, 2010 / Metallurgija, 2010, Vol.49, №3, P.228.
  • S. Dobatkin, P. Odessky, G. Raab,M. Pankova, V. Semenov, S. Shagalina. Mechanical behavior of submicrocrystalline 0.19%C low carbon steel after equal channel angular pressing. Summaries of lectures of 9th International Symposium of Croation Metallurgical Society. Sibenik, Croatia, June 20-24, 2010 / Metallurgija, 2010, Vol.49, №3, P.229.
  • S. V. Dobatkin, N.R. Bochvar, S.B. Grigorieva, M. Janecek. Specific Features of Structure Formation in Cu-0.18%Zr Alloy During High Pressure Torsion. Summaries of lectures of 9th International Symposium of Croation Metallurgical Society. Sibenik, Croatia, June 20-24, 2010 / Metallurgija, 2010, Vol.49, №3, P.229.
  • S. V. Dobatkin, L.L Rokhlin, T.V. Dobatkina, I.E. Tarytina, W. Botta. Structure of Mg-Sm-Y Alloy After High Pressure Torsion. Summaries of lectures of 9th International Symposium of Croation Metallurgical Society. Sibenik, Croatia, June 20-24, 2010 / Metallurgija, 2010, Vol.49, №3, P.229.
  • V. Terent’ev, S. Dobatkin, D. Prosvirnin, M.N.Pankova, I. Bannykh, G. Raab, O. Rybaltchenko. Fatigue strength of the 0.07%C-17.3%Cr-9.2%Ni austenitic steel after equal channel angular pressing. Summaries of lectures of 9th International Symposium of Croation Metallurgical Society. Sibenik, Croatia, June 20-24, 2010 / Metallurgija, 2010, Vol.49, №3, P.229.
  • S. Nikulin, S. Dobatkin, V. Turilina, V. Khanzhin, S. Rogachev. The Analysis of Deformation and Fracture of Submicrocrystalline Aluminum, Titanium and Zirconium Alloys by Acoustic Emission Method. Summaries of lectures of 9th International Symposium of Croation Metallurgical Society. Sibenik, Croatia, June 20-24, 2010 / Metallurgija, 2010, Vol.49, №3, P.212.
  • J. Zrnik, S. Dobatkin, G. Raab, M. Fujda, L. Kraus. Ultrafine Grained Structure Development in Steels with Different Initial Structure by Severe Plastic Deformation. Abstracts of the First TMS-ABM International Materials Congress, July 26-30, 2010, Rio de Janeiro, Brasil, p. T3.
  • R. Valiev, S. Dobatkin, W. Botta, T. Langdon. Bulk Nanostructured SPD-Processed Materials for Advanced Applications in Engineering and Medicine. Abstracts of the First TMS-ABM International Materials Congress, July 26-30, 2010, Rio de Janeiro, Brasil, p. T32.
  • S. Dobatkin, R. Valiev, V. Semenov, G. Raab, S. Shagalina. Mechanical Properties of Submicrocrystalline 0.19%C Low Carbon Steel after Equal Channel Angular Pressing and Heating. Abstracts of the First TMS-ABM International Materials Congress, July 26-30, 2010, Rio de Janeiro, Brasil, p. T33.
  • J. Zrnik, S. Dobatkin, G. Raab, L. Kraus. Ultrafine Grained Structure Formation in Low Carbon Steel Processed by SPD. Abstracts of The Seventh Pacific Rim International Conference on Advanced Materials and Processing, August 2-6, 2010, Cairns, Australia, p. 58.
  • S. Dobatkin, S. Nikulin, S. Rogachev. Grain refinement of zirconium alloys up to nano-level by severe plastic deformation. Abstracts of the 10-th International Conference on Nanostructured Materials - NANO 2010, September 13 - 17, 2010, Roma, Italy, p.148.
  • S. Dobatkin, G. Raab, M. Pankova, S. Shagalina. Structure formation in submicrocrystalline low carbon steel during equal channel angular pressing and heating. Abstracts of IV-th France-Russia Conference“New Achievements in Materials and Environmental Sciences” (NAMES’10), Nancy, FRANCE, October 26-29, 2010. P.39.
  • S. Nikulin, S. Dobatkin, S. Rogachev. Nanocrystalline zirconium alloys by severe plastic deformation. Abstracts of IV-th France-Russia Conference“New Achievements in Materials and Environmental Sciences” (NAMES’10), Nancy, FRANCE, October 26-29, 2010. P. 145.
  • S. Dobatkin. Mechanical and Service Properties of SPD Materials. Abstracts of International Conference «Recent trends in structural materials», 25–26 November 2010, Plzen, Czech Republic, p. 23.
2009
  • S. Dobatkin, J. Zrnik, S. Nikulin, T. Kovarik.Strength and plasticity of medium carbon steel after equal channel angular pressing. Abstracts of the 15th International Conference on the Strength of Materials, August 16-21, 2009, Dresden, Germany, p.46.
  • O. Rybchenko, G. Abrosimova, A. Aronin, S. Dobatkin, D. Matveev. Structure evolution of an amorphous phase and formation of nanocrystals under plastic deformation, ibid, p.116.
  • S. Dobatkin. Advantages and possible applications of SPD steels. Abstracts of the Second International Symposium “Bulk Nanostructured Materials: from fundamentals to innovations”, Ufa, Russia, September 22-26, 2009, p.14.
  • G.A. Salishchev, R.Z. Valiev, S.V. Dobatkin. Bulk nanostructured products produced by ECAP, multiple forging and combined with rolling: structure, properties, application. ibid, p.25.
  • A. Aronin, G. Abrosimova, S. Dobatkin, D. Matveev, O. Rybchenko. Formation of nanocrystals at severe plastic deformation of amorphous Fe-based alloys. ibid, p.102.
  • E.G. Astafurova, S.V. Dobatkin, G.G. Zakharova, E.V. Naydenkin, O.F. Vagapova, G.I. Raab. A comparative study of structure and mechanical properties of low carbon martensitic and ferritic-pearlitic steels processed by equal channel angular pressing. ibid, pp.188-189.
  • S.Dobatkin, Y.Estrin, V.Zakharov, T.Rostova, O.Ukolova, A.Chirkova. Structure and Properties of the Al-Mg-Mn-Zr-Sc Alloys with Different Initial States After ECA Pressing. ibid, pp.202-203.
  • S. Dobatkin, R. Valiev, M. Pankova, V. Semenov, G. Raab. S. Shagalina. Structure and mechanical behavior of submicrocrystalline low carbon steel after equal channel angular pressing and heating. ibid, p.204.
  • T. Dobatkina, L. Rokhlin, N. Nikitina, I. Korol’kova, S. Dobatkin. Aging of the Mg-Al-Ca-Mn alloy after high pressure torsion. ibid, p.205.
  • L. Kommel, S. Dobatkin, B. Straumal, I. Kommel, A. Kuznetsov. Structure evolution of submicrocrystalline copper during cyclic deformation. ibid, p.237.
  • A.Mazilkin, S.Protasova, A. Petelin, S.Dobatkin, B.Straumal, B.Baretzky. Role of grain segregation in “dissolution” of the cementite in the SPD-treated Fe-C alloys. ibid, p.267.
  • S. Nikulin, S. Dobatkin,V. Kopylov, S. Rogachev. Structure and properties of the nanocrystalline Zr-alloys after High Pressure Torsion. ibid, p.277.
  • A.Glezer, S. Dobatkin, M.Plotnikova, A.Shalimova. Features of severe plastic deformation for amorphous alloys. ibid, p.290.
  • V. Terentjev, S. Dobatkin, D. Prosvirnin, I. Bannykh, G. Raab, Olga Rybalchenko. Cyclic strength of the 0.07%C-17.3%Cr-9.2%Ni austenitic steel after equal channel angular pressing. ibid, pp.317-318.
  • V. Terentjev, S. Dobatkin, D. Prosvirnin, I. Bannykh, V. Kopylov, V. Serebryany. Fatigue of the Mg-3.0%Al-0.8%Zn-0.5%Mn alloy after equal-channel angular pressing. ibid,pp.319-320.
  • I. Tereshina, G. Burkhanov, S. Dobatkin. Nanocrystalline structure formation in Y-Fe-Co-B alloys and theregularieties of their magnetic hysteresis properties. ibid, p. 321.
  • B.B. Straumal, S.V. Dobatkin, A.L. Petelin, A.O. Rodin, A.M. Gusak, B. Baretzky. Grain Boundary Segregation as a reason of the “Cementite Dissolution” during Severe Plastic Deformation of Fe–C Alloys. Abstracts of International Symposium “Thermodynamics and Transport Kinetics of Nanostructured Materials (TTk)”, August 16-21, 2009, Schloss Nordkirchen, Germany, p. 122.
  • S.G. Protasova, A.A. Mazilkin, S.V. Dobatkin, A.L. Petelin, B.B. Straumal, B. Baretzky. Grain Boundary Segregation as a Reason of the “Cementite Dissolution” during Severe Plastic Deformation of Fe–C Alloys. Abstract Book of the 5th International Conference on Diffusion in Solids and Liquids, June 24-26, Rome, Italy, p. 218.
  • V.N.Serebryany, N.N.Pozdnyakova, V.I.Kopylov, S.V.Dobatkin. Influence of Texture and Microstructure on Formability of Mg-Al-Zn Alloy after Equel Channel Angular Pressing, In “Magnesium” (Proceedings of the 8th International Conference on Magnesium Alloys and their Applications, 26-29 Oct, 2009, Weimar, Germany) (Ed. by K.U. Kainer), WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim, 2009, pp.181-186.
  • S.V. Dobatkin, V.I. Kopylov, V.N. Perevezentsev, G.I. Raab, T.D. Rostova, V.V. Zakharov. Comparative analysis of the submicrocrystalline Al-6.0% Mg and Al-6.0% Mg-0.3% Sc alloys after ECA pressing. Proceedings of the 15-th International Symposium on Plasticity and Its Current Applications (Eds. A.S. Khan and B. Farrokh), St.Thomas, U.S. Virgin Islands, January 03-08, 2009, pp. 397-399.
2008
 
  • S.V. Dobatkin, P.D. Odessky, E.V. Naidenkin, S.V. Shagalina. «Mechanical and .Service Properties of Nano- and Submicrocryslalline Low Carbon Steels at Temperatures between (-40) and (+700)°C», Abstracts of the Fifth International Symposium on Ultrafine – Grained Materials, 137 th TMS Annual Meeting, March 9-13, New Orleans, USA, TMS, 2008, p.215.
  • S.V. Dobatkin, E.V. Naidenkin, E. G. Astafurova, S.V. Shagalina. «Nanocrystalline Low-Carbon 0.1%C-Mn-V-Ti Steel Processed by High Pressure Torsion», Abstracts of the 9th International Conference on Nanostructured Materials, 01-06.06.2008, Rio de Janeiro, Brasil, CBPF,2008, р. 235.
  • G. I. Raab, S. V. Dobatkin, S. V. Shagalina, P. D. Odessky. Mechanical properties of the low-carbon 09%C-Mn-Si Steel after EGA pressing and heating. Summaries of lectures of the 8-th International Symposium of Croatian metallurgical society, 22-26.06.08., Metalurgija (Metallurgy), Vol.47, №3, p.248.
  • J.Zrnik, S. V. Dobatkin, I. Mamuzic. Processnig of metals by severe plastie deformation (SPD) - structure and mechanical properties respond. Summaries of lectures of the 8-th International Symposium of Croatian metallurgical society, 22-26.06.08., Metalurgija (Metallurgy), Vol.47, №3, p.227.
  • S. Dobatkin, J. Zrnik, I. Mamuzic.Ultrafine-grained low carbon steels by severe plastic deformation (SPD). Summaries of lectures of the 8-th International Symposium of Croatian metallurgical society, 22-26.06.08., Metalurgija (Metallurgy), Vol.47, №3, p.227.
  • V.Yu. Turilina, S.A. Nikulin, S.V. Dobatkin. Fatigue properties of maraging steel with reverted austenite. Summaries of lectures of the 8-th International Symposium of Croatian metallurgical society, 22-26.06.08., Metalurgija (Metallurgy), Vol.47, №3, p.247.
  • O.V. Rybalchenko, S.V. Dobatkin, L.M. Kaputkina. Texture changes in corrosion-resistant steels upon severe plastic deformation by torsion and heating. Summaries of lectures of the 8-th International Symposium of Croatian metallurgical society, 22-26.06.08., Metalurgija (Metallurgy), Vol.47, №3, p.248.
  • G.E. Abrosimova, A.S. Aronin, S. V. Dobatkin, D.V. Matveev, O.G. Rybchenko. Effect of severe plastic deformation on structure of Fe — based amorphous alloys. Summaries of lectures of the 8-th International Symposium of Croatian metallurgical society, 22-26.06.08., Metalurgija (Metallurgy), Vol.47, №3, p.249.
  • V. N. Serebryany, S. V. Dobatkin, A. S. Gordeev, V. N. Timofeev. Texture and microstructure of magnesium alloy after high pressure torsion. Summaries of lectures of the 8-th International Symposium of Croatian metallurgical society, 22-26.06.08., Metalurgija (Metallurgy), Vol.47, №3, p.270.
  • S.A. Nikulin, V. Khanzhin, V.I. Kopylov, S.V. Dobatkin. Acoustic emission investigations of submicroerystalline aluminum alloys during deformation and fracture. Summaries of lectures of the 8-th International Symposium of Croatian metallurgical society, 22-26.06.08., Metalurgija (Metallurgy), Vol.47, №3, p.270.
  • S.V. Dobatkin, A.A. Kuznetsov. Severe Plastic Deformation of Copper by Different Schemes. The Book of Abstracts of 11-th International Symposium on Physics of Materials (ISPMA – 11), 24-28.08.2008, Prague, Czech Republic, 2008, p.19.
  • J.Zrnik, S.V. Dobatkin, T.Kovarik. Preliminary Treatment Effect on Ultrafine Grained Structure Formation in Low Carbon Steel Processed by ECAP. The Book of Abstracts of 11-th International Symposium on Physics of Materials (ISPMA – 11), 24-28.08.2008, Prague, Czech Republic, 2008,  p.167.
2007
 
  • S.V. Dobatkin, G.A.Salishchev, A.A. Kuznetsov, T.N. Kon’kova. Submicrocrystalline structure formation in copper during large strain deformation. Abstracts of the 2-nd International Symposium “Physics and Mechanics of Large Plastic Strains’, St-Petersburg, June 4-9, 2007, p.18.
  • J. Zrnik, S.V. Dobatkin, L. Kraus. Influence of Thermal Condition of ECAP on Microstructure Evolution in Low Carbon Steel. Abstract Book of the Third International Conference on Recrystallization and Grain Growth (ReX&GG III), June 10-15, 2007, Jeju, Korea, p.57.
  • S.V. Dobatkin, G.A.Salishchev, A.A. Kuznetsov, T.N. Kon’kova. Submicrocrystalline Structure in Copper after Different Severe Plastic Deformation Schemes. Abstract Book of the Third International Conference on Recrystallization and Grain Growth (ReX&GG III), June 10-15, 2007, Jeju, Korea, p.91.
  • K.E.Inaekyan, S.D.Prokoshkin, V.Brailovski, V.Demers, I.Yu.Khmelevskaya, S.V.Dobatkin. Structure and microstructure of titanium-nickel shape memory alloys processed by severe plastic deformation. Abstr. Book of 18th Canadian Materials Science Conference, 19-21.06.2007, Montreal.
  • V.Demers, V.Brailovski, S.D.Prokoshkin, K.E.Inaekyan, I.Yu.Khmelevskaya, S.V.Dobatkin. Functional properties of titanium-nickel shape memory alloys processed by severe plastic deformation. Abstr. Book of 18th Canadian Materials Science Conference, 19-21.06.2007, Montreal.
  • J. Zrnik, S. V. Dobatkin, Z. Novy, S. Nemecek. Medium carbon steel processed by Equal Channel Anngular Pressing. Abstracts of the International Symposium on Ultrafine Grained Steels (ISUGS-2007), 24-26 October, Kitakyushu, Japan, p.51.
  • S.V.Dobatkin. Prospects for the Production and Use of Nanostructured Steels. Abstracts of the BMWF-ISTC Workshop on Materials Sciences “Nanostructured Materials”, 28-29 June 2007, Vienna, Austria, p. 11-12.
  • S.V. Dobatkin. Development of SPD Continuous Processes for Strip Production. Abstracts of the International Symposium “Bulk Nanostructured Materials: from fundamentals to innovations”, Ufa, Russia, August 14-18, 2007, p.19.
  • G.E.Kodjaspirov, A.I.Rudskoy, S.V.Dobatkin. Application of Severe Plastic Deformation to produce Ultra-fine Grained and Nanostructured IF Steel. Abstracts of the International Symposium “Bulk Nanostructured Materials: from fundamentals to innovations”, Ufa, Russia, August 14-18, 2007, p. 22.
  • A.Glezer, S.Dobatkin, M.Plotnikova, A.Shalimova, N.Perov. The Anomaly of Saturation Magnetization and Nanocrystallization Effects at the Severe Plastic Deformation of A morphjus Ni-Fe-Co-Si-B Alloys. Abstracts of the International Symposium “Bulk Nanostructured Materials: from fundamentals to innovations”, Ufa, Russia, August 14-18, 2007, p. 31.
  • Yu.Yagodkin, S.Dobatkin. Application of Electron Microscopy and X-ray Diffraction Analysis for the Determination of the Sizes of Structure Elements in Nanocrystalline Materials. Abstracts of the International Symposium “Bulk Nanostructured Materials: from fundamentals to innovations”, Ufa, Russia, August 14-18, 2007, p.80.
  • S.V.Dobatkin, V.V.Zakharov, V.N.Perevezentsev, G.I.Raab, T.D.Rostova, E.N.Bastarache. Specific features of the structure formation in the Al-Mg-Sc alloys during SPD. Abstracts of the International Symposium “Bulk Nanostructured Materials: from fundamentals to innovations”, Ufa, Russia, August 14-18, 2007, p. 126.
  • S.V.Dobatkin, P.D.Odessky, E.V.Naidenkin, S.V.Shagalina, G.I.Raab. Thermal Stubility of Nano- and Submicrocrystalline Low Carbon Steels. Abstracts of the International Symposium “Bulk Nanostructured Materials: from fundamentals to innovations”, Ufa, Russia, August 14-18, 2007, p.127.
  • I. Khmelevskaya, S. Prokoshkin, I. Trubitsina, M. Belousov, S. Dobatkin, E. Tatyanin, A. Korotitskiy, V. Brailovski, V. Stolyarov, E. Prokofiev Nanostructured Materials: from fundamentals to innovations”, Ufa, Russia, August 14-18, 2007, p.143.
  • L.L. Rokhlin, S.V. Dobatkin, Yu. Estrin, M.V. Popov, T.V.Dobatkina, V.N. Timofeev, N.I. Nikitina, I.E. Tarytina. Submicrocrystalline structure formation in Mg-Al-Ca alloy during SPD. Abstracts of the International Symposium “Bulk Nanostructured Materials: from fundamentals to innovations”, Ufa, Russia, August 14-18, 2007, p.167.
  • L.L. Rokhlin, S.V. Dobatkin, Yu. Estrin, R. Lapovok, M.V. Popov, T.V.Dobatkina, V.N. Serebryany, V.N. Timofeev, N.I. Nikitina, I.E. Tarytina. Structure and properties of Mg-Sm alloys after SPD. Abstracts of the International Symposium “Bulk Nanostructured Materials: from fundamentals to innovations”, Ufa, Russia, August 14-18, 2007, p.168.
  • S. Prokoshkin, V. Brailovski, K. Inaekyan, V. Demers, I. Khmelevskaya, S. Dobatkin, E. Tatyanin. Severely Cold-Rolled and Annealed Ti-Ni Shape Memory Alloys: Structure, Transformations and Functional Properties. Abstracts of the International Symposium “Bulk Nanostructured Materials: from fundamentals to innovations”, Ufa, Russia, August 14-18, 2007, p.282-283.
  • S.V. Dobatkin. Development of SPD Continuous Processes for Nano- and Submicrocrystalline Structure Formation. Abstracts of the 6th International Conference Nano’07, October 8-10, 2007, Brno, Czech Republic, p.15.
  • J. Zrnik, S. Dobatkin. Ultrafaingrain Structure Development in Steels with Different Carbon Content Subjected to Warm Severe Plastic Deformation. Abstracts of the 6th International Conference Nano’07, October 8-10, 2007, Brno, Czech Republic, p.16.
  • V.N. Serebryany, M.V. Popov, A.S. Gordeev, L.L. Rokhlin, S.V. Dobatkin, F.Wagner. Texture of submicrocrystalline magnesium alloy after equal channel angular pressing. Abstracts of the 3-rd French-Russian Seminar “New Achievements in Materials and Environemental Sciences” (NAMES-2007), November 7-9, 2007, p. 28.
  • V.Yu. Turilina, S.A.Nikulin, S.V.Dobatkin. The Microstructure and Mechanical Properties of the High-Strength Steel with the Reverted Austenite. Abstracts of the 3-rd French-Russian Seminar “New Achievements in Materials and Environemental Sciences” (NAMES-2007), November 7-9, 2007, p. 30.
  • S.V.Dobatkin. Bulk nanocrystalline alloys by severe plastic deformation. Abstracts of the 3-rd French-Russian Seminar “New Achievements in Materials and Environemental Sciences” (NAMES-2007), November 7-9, 2007, p. 90.
  • I.S. Tereshina, G.S. Burkhanov, S.V. Dobatkin, O.D. Chistyakov, E.A. Tereshina, H. Drulis. Exchange Enhancement of the Remanent Magnetization in R2Fe14B Compounds and Their Hydrides with Nanograin Structure. Abstract Book of the International Conference “Magnetism on a Nanoscale” (EASTMAG-2007), 23-26 August, Kazan, Russia, p.212.
  • A.A. Mazilkin, B.B. Straumal, S.G. Protasova, S.V. Dobatkin, B. Baretzky. Role of grain boundaries in “dissolution” of the cementite diring severe plastic deformation of Fe–C alloys. 12th International Conference on Intergranular and Interphase Boundaries iib 2007, A. Cerra, R.C. Pond, S. Lartigue-Korinek (eds.), CIMNE, Barcelona, 2007, p. 66.
  • S.G. Protasova, B.B. Straumal, S.V. Dobatkin, D. Goll, G. Schütz, B. Baretzky. Coercivity and domain structure of nanograined Fe–C Alloys after high-pressure torsion. 12th International Conference on Intergranular and Interphase Boundaries iib 2007, A. Cerra, R.C. Pond, S. Lartigue-Korinek (eds.), CIMNE, Barcelona, 2007, p. 126.
2006
  • S.Dobatkin, O.Rybal’chenko, G.Raab. Structure formation, phase transformations and properties in Cr-Ni austenitic steel after ECA pressing and heating. Absracts of the Amiya Mukherjee Symposium on Processing and Mechanical Response of Engineering Materials. 135-th Annual TMS Meeting, March 12-16, 2006, San Antonio, Texas, USA, p. 22.
  • S.V.Dobatkin, J.A.Szpunar, A.P.Zhilyaev, A.A.Kuznetsov. ECA pressing up to failure of oxygen-free copper: structure, properties, effect of the route. Abstracts of the Fourth International Symposium on Ultrafine Grained Materials. 135-th Annual TMS Meeting, March 12-16, 2006, San Antonio, Texas, USA, p. 93.
  • J.Zrnik, J.Drnek, S.Dobatkin, O.Stejskal, Z.Novy. Medium carbon steel processed by warm equal channel angular pressing. Abstracts of the Fourth International Symposium on Ultrafine Grained Materials. 135-th Annual TMS Meeting, March 12-16, 2006, San Antonio, Texas, USA, p. 193.
  • S.D. Prokoshkin, I.Yu. Khmelevskaya, S.V. Dobatkin, I.B. Trubitsyna, E.V. Tatyanin, S.Turenne, V.Brailovski, V.V.Stolyarov, E.A.Prokofiev. Thermomechanical conditions for nanocrystalline structure formation and functional properties of severely deformed Ti-Ni shape memory alloys. Abstracts of the Fourth International Symposium on Ultrafine Grained Materials. 135-th Annual TMS Meeting, March 12-16, 2006, San Antonio, Texas, USA, p. 198.
  • S.V.Dobatkin, J.Zrnik, I.Mamuzic. Nanostructures by severe plastic deformation of steels: advantages and problems. Summaries of Lectures of 7-th International Symposium of Croatian Metallurgical Society “Materials and Metallurgy”, Sibenik, Croatia, June 18-22, 2006, Metallurgija (Metallurgy), Vol.45, (2006),No.3, p. 189-190.
  • J.Zrnik, I.Mamuzic, S.V.Dobatkin. Recent progress in high strength low carbon steels. Summaries of Lectures of 7-th International Symposium of Croatian Metallurgical Society “Materials and Metallurgy”, Sibenik, Croatia, June 18-22, 2006, Metallurgija (Metallurgy), Vol.45, (2006),No.3, p. 189.
  • E.V.Naidenkin, S.V.Dobatkin, P.D.Odessky, Yu.R.Kolobov, G.I.Raab, S.V.Shagalina. Mechanical Properties of Submicrocrystalline 0,1%C-Mn-V-Ti Steel at Elevated Temperatures. Summaries of Lectures of 7-th International Symposium of Croatian Metallurgical Society “Materials and Metallurgy”, Sibenik, Croatia, June 18-22, 2006, Metallurgija (Metallurgy), Vol.45, (2006),No.3, p. 204.
  • S.V.Dobatkin, A.A.Kuznetsov, G.A.Salishchev, Ya.Yu.Beigelzimer, D.V.Orlov. Submicrocrystalline Structure of Oxygen-Free Copper After Different Methods of Severe Plastic Deformation. Summaries of Lectures of 7-th International Symposium of Croatian Metallurgical Society “Materials and Metallurgy”, Sibenik, Croatia, June 18-22, 2006, Metallurgija (Metallurgy), Vol.45, (2006),No.3, p. 245.
  • Yu.F. Ivanov, E.V. Naidenkin, S.V. Shagalina, Y.T. Zhu, Yu.R. Kolobov, S.V. Dobatkin. Structure and Phase Transformations in 0,1%C-Mn-V-Ti Steel During High Pressure Torsion. Summaries of Lectures of 7-th International Symposium of Croatian Metallurgical Society “Materials and Metallurgy”, Sibenik, Croatia, June 18-22, 2006, Metallurgija (Metallurgy), Vol.45, (2006),No.3, p. 245.
  • S.V.Dobatkin, V.V.Zakharov, G.I.Raab, T.D.Rostova, E.N.Bastarache, A.G.Kishchenko. Warm and Hot Equal Channel Angular Pressing of Al-Mg-Sc-Zr Alloys. Summaries of Lectures of 7-th International Symposium of Croatian Metallurgical Society “Materials and Metallurgy”, Sibenik, Croatia, June 18-22, 2006, Metallurgija (Metallurgy), Vol.45, (2006),No.3, p. 245.
  • S.V. Shagalina , E.G. Koroleva , G.I. Raab , M.V. Bobylev , S.V. Dobatkin. Formation of Submicrocrystalline State of 0.14%C and 0.1%C-0.003%B Low-Carbon Steels During ECA Pressing. Summaries of Lectures of 7-th International Symposium of Croatian Metallurgical Society “Materials and Metallurgy”, Sibenik, Croatia, June 18-22, 2006, Metallurgija (Metallurgy), Vol.45, (2006),No.3, p. 245.
  • J.Zrnik, S.V.Dobatkin, L.Kraus, I.Mamuzic. Low Carbon Steel Processed by Equal Channel Angular Warm Pressing. Summaries of Lectures of 7-th International Symposium of Croatian Metallurgical Society “Materials and Metallurgy”, Sibenik, Croatia, June 18-22, 2006, Metallurgija (Metallurgy), Vol.45, (2006),No.3, p. 245.
  • S.V.Dobatkin, A.A. Kuznetsov. Comparative analysis of different severe plastic deformation schemes for copper. Book of abstracts of the International Conference “ Ultrafine Grained Materials: From Basics to Applications”, September 25-27, 2006, Kloster Irsee, Germany, p.6.27-6.29.
  • S.D. Prokoshkin, V.Brailovski, K.E. Inaekyan, V.Demers, I.Yu. Khmelevskaya, S.V. Dobatkin, E.V. Tatyanin, S.Turenne. Structure and properties of severely cold-rolled and annealed Ti-Ni shape memory alloys. Abstracts of of the European Symposium on Martensitic Transformation and Shape – Memory (ESOMAT-2006), 10-15.09.2006, Bochum, Ruhr-University-Bochum, Germany, 2006, p.102.
  • I.Yu. Khmelevskaya, S.D. Prokoshkin, I.B. Trubitsyna, M.N.Belousov, S.V. Dobatkin, E.V. Tatyanin, A.V.Korotitsky, V.Brailovski, V.V. Stolyarov, E.A. Prokofiev. Structure and properties of Ti-Ni-based alloys after equal-channel angular pressing and high pressure torsion. Abstracts of of the European Symposium on Martensitic Transformation and Shape – Memory (ESOMAT-2006), 10-15.09.2006, Bochum, Ruhr-University-Bochum, Germany, 2006, p. 105.
  • A.Aleshin, A.Arsenkin, S.Dobatkin. Study of Grain Growth Kinetics in Submicrocrystalline Armco-Iron. Abstracts of the FJH Symposium “Fundamentals of Deformation and Annealing”, Manchester; England, September 5-7, 2006, p.78.
  • T.Kvackaj, M.Zemko, T.Kuskulic, R.Kocisko, M.Basterci, S.Dobatkin, M.Molnarova. Nanosructural Formation in Steel Material by ECAP. Extended Abstracts of the 2006 POWDER METALLURGY World Congress. Part 1. Ed. by K.Y.Eun and Y.-S.Kim. September 24-28, 2006, BEXCO, Busan, Korea, p.130-131.
Membership in Public Organizations:
  • Corresponding Member of the Russian Academy of Natural Sciences, 2000.
  • Member of the TMS Society (USA), 2002-2011.
 
Awards:
  • Diploma for the plenary lecture at the 7th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy, Shibenik, Croatia, 18-22 June 2006.
  • Medal of Academician AF Belov for excellence in materials science, August 2006.
  • At the 4th International Symposium on ultrafine-grained Materials in San Antonio, USA (Fourth International Symposium on Ultrafine Grained Materials. 135-th Annual TMS Meeting, March 12-16, 2006, San Antonio, Texas, USA) posters SD Prokoshkin, I.Yu. Khmelevskaya, S.V. Dobatkin, I.B. Trubitsyna, E.V. Tatyanin, S. Turenne, V. Brailovski, VV Stolyarov, EA Prokofiev. Thermomechanical conditions for nanocrystalline structure formation and functional properties of severely deformed Ti-Ni shape memory alloys, second best among the poster presentations.
  • Diploma for the plenary lecture at the 8th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy, Shibenik, Croatia, 22-26 June 2008
  • On 4th International Conference on Nanomaterials by severe plastic deformation (city of Goslar, Germany, 18-22.08.2008), the report "Severe plastic deformation of amorphous alloys" (AM Glezer, SV Dobatkin, MR Plotnikova, AV Shalimova), diploma for the top position among the poster presentations.
  • Diploma for the plenary lecture on 9th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy, Shibenik, Croatia, 21-27 June 2010.
Diploma works:
 
2006
Diploma of Engineer:

  • A.V. Solovyev (SM-01-2) – “Quality Enchancement of Fasteners from Low Carbon Steels Due to Submicrocrystalline Structure Formation”.
2007
Diploma of Engineer:

  • A.V. Lugovskaya (SM-02-2) – “ Submicrocrystalline Structure Formation in Austenitic Steel 08Kh18N10T During ECA Pressing and Heating”.
Diploma of Bachalor:
  • S.A. Kotova (MF-02-3) – “Structure Formation in Microallowed Low Carbon Steel 10G2FT During ECA Pressing and Heating”.
2008
Diploma of Engineers:

  • D.V. Sporykhin (MT-03-1) - “Ultrafine Grained Structure Formation in Copper Mob During Severe Plastic Deformation”.
  • A.V. Belozerova (MT-03-1) – “Reasons of Crack Formation During Continous Casting of Srengthening Steels”.
  • K.I. Mashkov (MT-03-1) – “Comparison Investigation of Strucrure and Mechanical Behevior of Al-Mg and Al-Mg-Sc Alloys After ECA Pressing”.
  • D.S. Pak (MF-02-3) – “Spheroidization of Cementite in Submicrocrystalline Steels With Content of Carbon 0,1-0,4% During Severe Plastic Deformation and Subsequent Heating”.
  • A.V. Tchervonny ( МТ-03-1) – “Investigation of Strucrure and Properties of Al-Mg-Zr and Al-Mg-Sc-Zr Alloys After ECA Pressing”.
2009
Diploma of Engineers:

  • O.A. Dyachenko (MF-03-3) - “Investigation of Strucrure and Mechanical Properties of Submicrocrystalline Steel St.20 After ECA Pressing”.
  • S.A. Bubyakin (MT-04-1) – “Features of Structure Formation in Al-Mg-Mn Alloys With Zr and Sc Additions After High Pressure Torsion”.
  • E.V. Dorofeev (NM-04-1) - “Features of Structure and Properties of Steels 10 and 20 After ECA Pressing”.
  • V.V. Pletnev (NM-04-1) – “Comparison Analysis of Structure and Properties of Copper After Different Modes of Severe Plastic Deformation”.
  • O.V. Balykina (PM-04-1). – “Model of Structure and Texture Parameters Influence on Yield Stress and Ductility of Magnesium Alloy МА 2-1 After Constrained Groove Pressing”.
2010
Diploma of Engineers:

  • S.B. Grigorieva (MF-04-3) - “Features of Structure and Properties of Zr Bronze After High Pressure Torsion”.
  • S.I. Sobolev (MF-04-3) - “Features of Structure and Properties of Stainless Austenitic Steel 08Kh18N10T After Severe Plastic Deformation”.
  • A.V. Rudashevskaya (MT-05-1) – “Structure Formation in Cu-0,18% Zr Alloy During Shear Under Pressure and Heating”.
  • T.R. Sadykov (NM-05-1) - “Features of Structure and Properties of Stainless Austenitic Steel 08Kh18N10T After Severe Plastic Deformation at T=20-500оС”.
Diploma of Bachalor:
  • K.A. Sharipova (MT-06-1) - “Structure and Properties of Stainless Steel 08Kh18N10T After Shear Under Pressure at T=20-500 оС”.