2021
-
Development of Mg—Zn—Y—Zr casting magnesium alloy with high thermal conductivity / Bazhenov, V.E., Koltygin, A.V., Sung, M.C., ...Belov, V.D., Malyutin, K.V. // Journal of Magnesium and Alloys, 2021, 9(5), стр.
1567–157 -
Microstructure and mechanical and corrosion properties of hot-extruded Mg—Zn—Ca—(Mn) biodegradable alloys / Bazhenov, V.E., Li, A.V., Komissarov, A.A., ...Mukhametshina, A.M., Tokar, A.A. // Journal of Magnesium and Alloys, 2021, 9(4), стр.
1428–144 -
Study of the Properties of C92900 Bronze Obtained by Permanent Mold Casting, Upward Casting, and Hot Extrusion / Bazhenov, V.E., Titov, A.Y., Shkalei, I.V., ...Belov, V.D., Yudin, V.A. // Russian Journal of Non-Ferrous Metals, 2021, 62(4), стр.
413–423 -
Susceptibility of Mg—REM—Zn—Zr Magnesium Alloys to Casting Unsoundness / Koltygin, A.V., Bazhenov, V.E., Plisetskaya, I.V., ...Belov, V.D., Yudin, V.A. // Russian Metallurgy (Metally), 2021, 2021(7), стр.
821–829 -
Effect of the Cooling Rate on the Microstructure and Properties of C92900 Bronze / Bazhenov, V.E., Titov, A.Y., Shkalei, I.V., ...Mezrin, A.M., Koltygin, A.V. // Russian Journal of Non-Ferrous Metals, 2021, 62(3), стр.
274–285 -
Comparison of castability, mechanical, and corrosion properties of Mg-Zn-Y-Zr alloys containing LPSO and W phases / Bazhenov, V.E., Saidov, S.S., Tselovalnik, Y.V., ...Koltygin, A.V., Belov, V.D. // Transactions of Nonferrous Metals Society of China (English Edition), 2021, 31(5), стр.
1276–1290 -
Investigation of the Interfacial Heat Transfer Coefficient at the Metal—Mold Interface During Casting of an A356 Aluminum Alloy and AZ81 Magnesium Alloy into Steel and Graphite Molds / Bazhenov, V.E., Tselovalnik, Y.V., Koltygin, A.V., Belov, V.D. // International Journal of Metalcasting, 2021, 15(2), стр.
625–637 -
Investigation of Effect of Casting Rate on Structure and Properties of Bronze Br010S2N3 Rods Prepared by Upwards Continuous Casting / Bazhenov, V.E., Titov, A.Y., Shkalei, I.V., ...Belov, V.D., Yudin, V.A. // Metallurgist, 2021, 65(7-8), стр.
735–745 -
Influence of the small sc and zr additions on the as‐cast microstructure of al—mg—si alloys with excess silicon / Aryshenskii, E., Lapshov, M., Hirsch, J., ...Drits, A., Zaitsev, D. // Metals, 2021, 11(11), 179
-
Effect of Scandium on the Microstructure of the Al—Cu—Mn—Mg—Hf—Nb Alloy / Yashin, V.V., Aryshenskii, E.V., Drits, A.M., ...Ragazin, A.A., Bazhenov, V.E. // Physics of Metals and Metallography, 2021, 122(10), стр.
960–968 -
Effect of Heat Treatment Temperature on the Pore Size and Density in Plasma Sprayed Aluminum Oxide Parts / Belyaev, I.V., Pavlov, A.A., Bazhenov, V.E., Stepnov, A.A., Kireev, A.V. // Inorganic Materials, 2021, 57(2), стр.
213–218 -
Simulation and Experimental Validation of A356 and AZ91 Alloy Fluidity in a Graphite Mold / Bazhenov, V.E., Petrova, A.V., Rizhsky, A.A., ...Sannikov, A.V., Belov, V.D. // International Journal of Metalcasting, 2021, 15(1), стр.
319–32 -
Features of the Continuous Casting of Small-Section Billets from Copper-Based Alloys / Tavolzhanskii, S.A., Pashkov, I.N. // Metallurgist, 2021, 64(9-10), стр.
1068–1076 -
Influence of solder and flux composition on thermal stability of brazed PDC cutters / Pashkov, I.N., Misnikov, V.E., Morozov, V.A., Gadzhiev, M., Bazlova, T.A. // Welding International, 2021, 35(1-3), стр.
121–126 -
Formation of a phase separated structure in the Zr—Cu—Fe—Al alloys by thermo-mechanical processing / Bazlov, A.I., Parkhomenko, M.S., Tabachkova, N.Y., ...Bazlova, T.A., Louzguine-Luzgin, D.V. // Intermetallics, 2021, 135, 10722
-
Phase transitions in Fe-(23−24)Ga alloys: Experimental results and modeling / Pavlukhina, O.O., Sokolovskiy, V.V., Matyunina, M.V., ... Palachev V.A, Balagurov, A.M., Golovin, I.S. // Journal of Alloys and Compounds, 2021, 885, 160917
-
Effect of Heat Treatment on the Mechanical and Corrosion Properties of Mg-Zn-Ga Biodegradable Mg Alloys / Viacheslav Bazhenov , Anastasia Lyskovich , Anna Li , Vasily Bautin , Alexander Komissarov , Andrey Koltygin , Andrey Bazlov , Alexey Tokar 2, Denis Ten , Aigul Mukhametshina // Materials, 2021, 14(24), 7847
2020
-
Structure, mechanical characteristics, biodegradation, and in vitro cytotoxicity of magnesium alloy ZX11 processed by rotary swaging / Martynenko, N., Anisimova, N., Kiselevskiy, M., ...Dobatkin, S., Estrin, Y. // Journal of Magnesium and Alloys. — Volume 8, Issue 4. — December 2020. — Pages
1038-1046 -
Investigation of the Interfacial Heat Transfer Coefficient at the Metal—Mold Interface During Casting of an A356 Aluminum Alloy and AZ81 Magnesium Alloy into Steel and Graphite Molds / Bazhenov, V.E., Tselovalnik, Y.V., Koltygin, A.V., Belov, V.D. // International Journal of Metalcasting. — 2020
-
Design of Mg-Zn-Si-Ca casting magnesium alloy with high thermal conductivity / Bazhenov, V.E., Koltygin, A.V., Sung, M.C., ...Belov, V.D., Malyutin, K.V. // Journal of Magnesium and Alloys. — 2020, 8(1). — стр.
184-191 -
Nonsensitizing Zr—O—N Coatings for Jewelry Made of Nonprecious Alloys / Bazhenov, V.E., Khramchenkova, E.S., Koltygin, A.V., Prishepov, S.V., Shkalei, I.V. // Russian Journal of Non-Ferrous Metals. — 2020, 61(2). — стр.
234-240 -
Influence of Y and Zr on TiAl43Nb4Mo1B0.1 titanium aluminide microstructure and properties / Bazhenov, V.E., Kuprienko, V.S., Fadeev, A.V., (...), Plisetskaya, I.V., Logachev, I.A. // Materials Science and Technology (United Kingdom). — 2020. — 36(5), стр.
548-555 -
Gallium-containing magnesium alloy for potential use as temporary implants in osteosynthesis / Bazhenov, V., Koltygin, A., Komissarov, A., ...Komissarova, J., Estrin, Y. // Journal of Magnesium and Alloys. — 2020, 8(2). — стр.
352-363 -
Simulation and Experimental Validation of A356 and AZ91 Alloy Fluidity in a Graphite Mold / Bazhenov, V.E., Petrova, A.V., Rizhsky, A.A., ...Sannikov, A.V., Belov, V.D. // International Journal of Metalcasting. — 2020
-
Investigation of the Effect of Manufacturing Methods and Sr Addition on the Structure and Properties of Solder 34А (Al — 27% Cu — 6% Si) / Tavolzhanskii, S.A., Bazhenov, V.E., Pashkov, I.N. // Metallurgist. — 2020. — 63(9-10). — стр.
1114-1123 -
Recycling of Alumina Power After Plasma Spraying / Stepnov, A.V., Belyaev, I.V., Bazhenov, V.E., Pavlov, A.A., Kireev, A.V. // Refractories and Industrial Ceramics. — 2020, 61(2). — стр.
196-199 -
Effect of Annealing Conditions on the Evolution of the Grain Structure and Intermetallic Phases in the Cold-Rolled Strip of Aluminum—Magnesium Alloy // Tepterev, M.S., Aryshenskii, E.V., Guk, S.V., Bazhenov V.E., Drits, A.M., Kavalla, R. / Physics of Metals and Metallography. — 2020, 121(9). — стр.
906-913 -
Calculations of some thermo-physical properties of aluminum alloys using data of thermal analysis / Deev V.B., Prihodko O.G., Prusov E.S., Kutsenko A.I., Mei Shunqi, Aksenov A.A., Bazlova T.A. // IOP Conf. Series: Material Science and Engineering. — 734 (2020) 012076. — pp.1-6
-
Laser surfacing of copper-based alloys on steel / Prince, A.N., Biryukov, V.P., Savin, A.P., ...Klevetov, D.V., Bazlova, T.A. // IOP Conference Series: Materials Science and Engineering. — 2020. — 747(1). — 012040
-
Development of methods for calculating the solidification time of castings and ingots in metal mold / Deev, V.B., Prikhodko, O.G., Prusov, E.S., ...Smetanyuk, S.V., Bazlova, T.A., Sokorev, A.A. // IOP Conference Series: Materials Science and Engineering. — 2020. — 866(1). — 012012
-
The study of anticorrosive cold sprayed Al-Zn coatings for Nd-Fe-B permanent magnets / Belyaev I., Frolov K., Stepnov A., Bazhenov V., Kireev A. // METAL 2020 — 29th International Conference on Metallurgy and Materials, Conference Proceedings:
828-833, 2020-01-01,
ID:85096787655 -
Microstructure and mechanical and corrosion properties of hot-extruded Mg—Zn—Ca—(Mn) biodegradable alloys / Bazhenov V.E., Li A.V., Komissarov A.A., Koltygin A.V., Tavolzhanskii S.A. et al. // Journal of Magnesium and Alloys. — 2020. — DOI: 10.1016/j.jma.2020.11.008
-
Experimental and Computational Determination of the Wear Resistant Coefficient for Coatings with Nanodispersed Carbide Particles Added by Laser Surfacing / Biryukov V.P., Bazlova T.A. // Russian Journal of Non-Ferrous Metals. — Volume 61. — 2020. — Pages
739–744 -
Dependence of Cast Iron Chill from its Carbon Equivalent / Ten E.B., Kol’ O.A. // Steel in Translation. — Volume 50 (2020). — Pages31—35
2019
-
Refining of metal melts by filtration method / Shipilov SE, Ten EB, Zholdubayeva ZD, Isin DK, Mekhtiyev AD, Shipilova SS, Yurchenko EV // METABK. — 58(3-4). —
303-306 (2019) -
Studies on the possibility of using industrial waste for manufacturing refractories / Sokorev, A.A., Mishurov, S.S., Naumova, E.A., Dolbachev, A.P. // Tsvetnye Metally. — Issue 1. — 2019. — Pages
45-51 -
Influence of Atomic and Molecular Hydrogen in Silumins Melts on Their Mechanical Properties / Baranov, V.N., Deev, V.B., Partyko, E.G., (...), Yur’ev, P.O., Prusov, E.S. // Metallurgist. — Volume 63, Issue
5-6. — 1 September 2019. — Pages521-528 -
Effect of Сa and Zn alloying on the structure and properties of Аl — 2.5%mg alloy / Naumova, E.A., Petrzhik, M.I., Shurkin, P.K., Sokorev, A.A. // Non-ferrous Metals. — Volume 46, Issue 1. — 2019. — Pages
22-27 -
Development of the Composition of a Magnesium Alloy for the Fabrication of Temporal Sealing Facilities Used in the Petroleum Industry / Rakoch AG, Predein NA, Gladkova AA, Koltygin AV, Vorozhtsova VV // Russian Journal of Non-Ferrous Metals. — July 2019. — Volume 60, Issue 4. — pp
401–407 -
Effects of small additions of Zn on the microstructure, mechanical properties and corrosion resistance of WE43B Mg alloys / Koltygin AV, Bazhenov VE, Khasenova RS, Komissarov AA, Bazlov AI, Bautin VA // International Journal of Minerals, Metallurgy, and Materials. — July 2019. — Volume 26, Issue 7. — pp
858–868 -
Effect of scrap using in charge on the structure and properties of Zhs6U nickel-based superalloy. Part 1. microstructure analysis and phase composition of zhs6u alloy prepared with scrap / Koltygin A., Bazhenov V., Bazlov A., Bazlova T., Belov V. // Izvestiya Ferrous Metallurgy. — Volume 62, Issue 5. — 2019. — Pages
360-365 -
Effect of scrap using in charge on the structure and properties of ZHS6U nickel-based superalloy. Part 2. Macrostructure analysis and mechanical properties of ZHS6U prepared with scrap / Koltygin, A.V., Bazhenov, V.E., Bazlov, A.I., Bazlova, T.A., Belov, V.D. // Izvestiya Ferrous Metallurgy. — Volume 62, Issue 7. — 2019. — Pages
525-530 -
Aluminum Matrix In-Situ Composites Reinforced with Mg2Si and Al3Ti / Prusov, E., Deev, V., Rakhuba, E. // Materials Today: Proceedings. — Volume 11. — 2019. — Pages
386-391. 2018 International Conference on Modern Trends in Manufacturing Technologies and Equipment, ICMTMTE 2018; Sevastopol; Russian Federation; 10 September 2018 до 14 September 2018; Код 147927 -
Application of Liquid Glass Mixtures with Improved Knocking-Out Ability in Castings Production for Railway Transport / Svinoroev Y, Batyshev K, Deev V, Semenov K, Bykadorov V, Prusov E // Archives of Foundry Engineering. — 2019. — vol. 19, No 3. — Pages
27-32 -
Effect of scandium on the structure, segregation and properties of the aluminium cast alloy АМ4.5Cd / Ri E., Ri H., Deev V., Kolisova M. // Tsvetnye Metally. — Issue 7. — May 2019. — Pages
78-85 -
Influence of a Magnetic Field on Structure Formation during the Crystallization and Physicomechanical Properties of Aluminum Alloys / Vdovin KN, Dubsky GA, Deev VB, Egorova LG, Nefediev AA, Prusov ES // Russian Journal of Non-Ferrous Metals. — Volume 60, Issue 3. — 1 May 2019. — Pages
247-252 -
Influence of flux composition on hydrogen content in aluminum melts / Belyaev S., Baranov V., Deev V., Prusov E., Gubanov I., Partyko E. // ARPN Journal of Engineering and Applied Sciences. — Volume 14, Issue 8. — 1 April 2019. — Pages
1570-1573 -
Physical methods of melt processing at production of aluminum alloys and composites: Opportunities and prospects of application / Deev V., Prusov E., Rakhuba E. // Materials Science Forum. — Volume 946 MSF. — 2019. — Pages
655-660. International Russian Conference on Materials Science and Metallurgical Technology, 2018; Vladivostok; Russian Federation; 1 October 2018 до 4 October 2018; Код 226009 -
The influence of the melt cooling rate on shrinkage behaviour during solidification of aluminum alloys / Smetanyuk S., Temlyantsev M., Vdovin K., Ponomareva S., Deev V., Prusov E., Shunqi M., Ri E., Bazlova T. // IOP Conference Series: Materials Science and Engineering. — Volume 537, Issue 2. — 25 June 2019, Номер статьи 022080. International Workshop on Advanced Technologies in Material Science, Mechanical and Automation Engineering — MIP: Engineering-2019; Krasnoyarsk; Russian Federation; 4 April 2019 до 6 April 2019; Код 149243
-
Computer Simulation of Mannesmann Piercing of Aluminium Alloy Ingots / Skripalenko, M.M., Romantsev, B.A., Bazhenov, V.E., (...), Savonkin, M.B., Gladkov, Y.A. // Russian Journal of Non-Ferrous Metals. — Volume 60, Issue 1. — 1 January 2019. — Pages
27-34 -
Nonmetallic Inclusions in Alloys of the Fe — Co — Ni — Cu — Al — Ti System with Hafnium and Niobium / Belyaev, I.V., Bazhenov, V.E., Moiseev, A.V. // Metal Science and Heat Treatment. — Volume 60, Issue
11-12. — 15 March 2019. — Pages795-801 -
Understanding the effect of the mould material on the quality of investment titanium alloy castings / Kachalov, A.Y., Belov, V.D., Bazhenov, V.E., Fadeev, A.V. // Tsvetnye Metally. — Volume 2019, Issue 6. — 2019. — Pages
84-91 -
Control over the Porosity of Plasma Sprayed Aluminum Oxide Parts by Heat Treatment / Stepnov, A.A., Belyaev, I.V., Bazhenov, V.E., Pavlov, A.A., Kireev, A.V. // Inorganic Materials. — Volume 55, Issue 12. — 1 December 2019. — Pages
1214-1222 -
Creation of damping alloys with optimum physical-mechanical properties for geological exploration equipment parts / Suleyev, D.K., Utepov, E.B., Zhumadilova, Z.O., Ten E.B. // News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences. — Volume 5, Issue 437. — September-October 2019. — Pages
106-113 -
Microstructure and mechanical properties of the Mg-Zn-Ca AND Mg-Zn-Ca-Mn biodegradable magnesium alloys after hot extrusion / Viacheslav Bazhenov, Anna Li, Andrey Koltygin, Alexander Komissarov, Stanislav Tavolzhanskii, Denis Ten, Yury Gamin, Julia Komissarova // Conference Proceedings “Metall-2019”. — May 22nd — 24th 2019, Brno, Czech Republic, EU. — pp.
1267-1273 -
Investigation into the Surface Layer Composition Formed on the Ml19 (Mg—Nd—Y—Zn—Zr) Magnesium Alloy during Melting under Protective Gas Atmospheres / Bazhenov, V.E., Koltygin, A.V., Titov, A.Y., Rizhskiy, A.A., Belov, V.D. // Russian Journal of Non-Ferrous Metals. — Volume 60, Issue 6. — 1 November 2019. — Pages
652-661 -
Influence of polymorphic transformations on the porosity of plasma-sprayed products from pure aluminum oxide / Igor BELYAEV, Alexey STEPNOV, V. E. Bazhenov, Artem PAVLOV // Metal 2019 — 28th International conference on metallurgy and materials, conference proceedings (28th international conference on metallurgy and materials, Metal 2019, Brno,
22–24 мая 2019 года). — pp.968-972
2018
-
The Influence of Composition and Heat Treatment on the Phase Composition and Mechanical Properties of ML19 Magnesium Alloy / Koltygin, A.V., Bazhenov, V.E., Letyagin, N.V., Belov, V.D. // Russian Journal of Non-Ferrous Metals. — 2018. — January 2018, — Volume 59, — Issue 1, — pp
32–41 (0.446) -
Nonmetallic inclusions in a new alloy for single-crystal permanent magnets / Belyaev, I.V., Bazhenov, V.E., Kireev, A.V., Moiseev, A.V. // Metal Science and Heat Treatment. — 2018. — Volume 18, — Issue 2, — Pages
11-14 (0.316) -
Microsegregation of silicon in cast iron / Bazhenov, V.E., Pikunov, M.V. // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya. — 2018. — Volume 61, — Issue 3, — Pages
230-236 -
Influence of the Chemical Composition and Heat Treatment Modes on the Phase Composition and Mechanical Properties of the ZK51A (ML12) Alloy / Koltygin, A.V., Bazhenov, V.E. // Russian Journal of Non-Ferrous Metals. — 2018. — Volume 59, — Issue 2, — Pages
190-199 (0.238) -
Rich Zinc Phase Formation Mechanism at the Surface of Continuously-Cast Brass Billets / Tavolzhanskii, S.A., Bazhenov, V.E., Pashkov, I.N., Ivanov, E.S. // Metallurgist. — 2018. — Volume 62, — Issue
1-2, — Pages78-83 (0.277) -
Isothermal Solidification of an Al—Zn Alloy / Bazhenov, V.E., Pikunov, M.V., Pashkov, I.N. // Russian Metallurgy (Metally). — 2018. — Volume 2018, — Issue 5, — Pages
445-452 -
Effects of Si and Cu contents on grain size of Al—Si—Cu alloys / Bazhenov, V.E., Magura, M.A. // Materials Science and Technology (United Kingdom). — 2018. — Volume 34, — Issue 11, — Pages
1287-1294 (1,538) -
Evaluation of quality of rolled steel for cold volume forging / Filippov, A.A., Pachurin, G.V., Kuz’min, N.A., Matveev, Y.I., Deev, V.B. // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya. — 2018. — Volume 61, — Issue 7, — Pages
551-556 -
The technology of synthesis of a master alloy with nickel and rare earth aluminides and its influence on the structure formation, segregation processes and properties of aluminum alloys / Ri, E.H., Ri, K., Deev, V.B., Goncharov, A.V. // Tsvetnye Metally. — 2018. — Issue 5, — Pages
56-63 -
Technology of obtainment of ligature alloys with rare-earth metal aluminides / Ri, E.Kh., Ri, K., Deev, V.B., Goncharov, A.V. // Tsvetnye Metally. — 2018. — Issue 4, — Pages
61-66 -
Processing of aluminum melts using screen filters impregnated with slurry of salt quench baths / Grachev, A.N., Leushin, I.O., Deev, V.B., Koshelev, O.S. // Tsvetnye Metally. — 2018. — Issue 8, — Pages
86-90 -
Influence of melting unit type on the properties of middle-carbon cast steel / Deev, V.B., Prusov, E.S., Vdovin, K.N., Bazlova, T.A., Temlyantsev, M.V. // ARPN Journal of Engineering and Applied Sciences. — 2018. — Volume 13, — Issue 3, — Pages
998-1001 (0.19) -
Theoretical and experimental evaluation of the effectiveness of aluminum melt treatment by physical methods / Deev, V.B., Prusov, E.S., Kutsenko, A.I. // Metallurgia Italiana. — 2018. — Volume 110, — Issue 2, — Pages
16-24 (0.432) -
Preparation of Aluminum-Scandium Master Alloys by Aluminothermal Reduction of Scandium Fluoride Extracted from Sc2 O3 / Kulikov, B.P., Baranov, V.N., Bezrukikh, A.I., Deev, V.B., Motkov, M.M. // Metallurgist. — 2018. — Volume 61, — Issue
11-12, — Pages1115-1121 (0.277) -
Synthesis of complex-alloyed nickel aluminides from oxide compounds by aluminothermic method // Gostishchev, V., Ri, E., Ri, H., (...), Deev, V., Prusov, E. / Metals. — 2018. — Volume 8, — Issue 6, — Номер статьи 439 (1,899)
-
Synthesis of New Materials in the Boron-Carbon System // Filonenko, V.P., Nozhkina, A.V., Romanov, R.I., (...), Troyan, I.A., Fominskii, V.Y. / Glass and Ceramics (English translation of Steklo i Keramika). — 2018. — Volume 74, — Issue
11-12, — Pages434-439 (0.473) -
Synthesis, Characterization of Elastic and Electrical Properties of Diamond-like BCx Nano-Phases Synthesized under High and Low Pressures // Zinin PV, Nozhkina AV, Romanov RI, Filonenko VP, Titov SA et al. / Glass and Ceramics (English translation of Steklo i Keramika). — 2018. — Volume 3, Issue
1-2 (Nanomaterials) — pp.45-52 (0.473) -
Simulation of Fluidity and Misrun Prediction for the Casting of 356.0 Aluminum Alloy into Sand Molds / Bazhenov, V.E., Petrova, A.V., Koltygin, A.V. // International Journal of Metalcasting. — 2018. — Volume 12, — Issue 3, — Pages
514-522 (0.779) -
Forecasting the structure of large-sized flat plates from aluminum alloys / Belyaev, S.V., Deev, V.B., Baranov, V.N., (...), Kirko, V.I., Koptseva, N.P. // ARPN Journal of Engineering and Applied Sciences. — Volume 13, Issue 18. — 1 September 2018. — Pages
4929-4933 -
Simulation of crystallization parameters of casting alloys during modifying treatment by physical impact / Deev, V.B., Prikhodko, O.G., Ponomareva, K.V., (...), Kh Ri, E., Smetanyuk, S.V. // IOP Conference Series: Materials Science and Engineering. — Volume 411, Issue 1. — 19 October 2018 (Номер статьи 01202620th International Scientific and Research Conference — Metallurgy: Technologies, Innovation, Quality, Metallurgy 2017; Siberian State Industrial UniversityNovokuznetsk; Russian Federation; 15 November 2017 до 16 November 2017)
-
Comparison of copper-phosphorus brazing alloys rods obtained by continuous casting and hot extrusion techniques / Tavolzhanskii, S.A., Bazhenov, V.E., Pashkov, I.N. // Tsvetnye Metally. — Issue 9. — 2018. — Pages
66-70 -
Effect of superheat melt treatment on structure and mechanical properties of in-situ aluminum matrix composites / Prusov, E., Deev, V., Rakhuba, E.// METAL 2018 — 27th International Conference on Metallurgy and Materials, Conference Proceedings. — 2018. — Pages
1358-1362 (27th International Conference on Metallurgy and Materials, METAL 2018; Hotel Voronez IBrno; Czech Republic; 23 May 2018 до 25 May 2018; Код 142841) -
A study on the metal loss of spring steel 40s2 heated for rolling and peculiarities of the structure, chemical and phase composition of its scale / Temlyantsev, M.V., Konoz, K.S., Kuznetsova, O.V., Deev, V.B., Zhivago, E.Y. // IOP Conference Series: Materials Science and Engineering. — Volume 411, Issue 1. — 19 October 2018. — Номер статьи 012075 (20th International Scientific and Research Conference — Metallurgy: Technologies, Innovation, Quality, Metallurgy 2017; Siberian State Industrial UniversityNovokuznetsk; Russian Federation; 15 November 2017 до 16 November 2017; Код 141585)
-
Influence of peculiarities of Plasma spray technology on efficiency of Al2O3 coatings / Stepnov A., Belyaev I., Bazhenov V., Pavlov A., Kireev A. // Metal 2018 — 27th International Conference on Metallurgy and Materials, Conference Proceedings 2018. — Pages
1040-1044. 27th International Conference on Metallurgy and Materials, METAL 2018; Hotel Voronez IBrno; Czech Republic; 23 May 2018 до 25 May 2018; Код 142841 -
Effect of Low-Melting Metals (Pb, Bi, Cd, In) on the Structure, Phase Composition, and Properties of Casting Al—5% Si—4% Cu Alloy / Yakovleva A., Belov N., Bazlova T., Shkalei I. // Physics of Metals and Metallography. — January 2018. — Volume 119, Issue 1. — pp
35–43 -
Microalloying of Al-5%Cu aluminum alloy with nickel aluminides and rare-earth metals / Ri E., Ri K., Deev V., Prusov E. // 73rd World Foundry Congress “Creative Foundry”, WFC 2018 — Proceedings 2018. — Pages
159-160. 73rd World Foundry Congress: Creative Foundry, WFC 2018; Krakow; Poland; 23 September 2018 до 27 September 2018; Код 144933 -
Mechanism of influence of nanosecond electromagnetic pulses on crystallization behavior of aluminum alloys / Deev V., Ri E., Prusov E. // METAL 2018 — 27th International Conference on Metallurgy and Materials, Conference Proceedings 2018. — Pages
1363-1368. 27th International Conference on Metallurgy and Materials, METAL 2018; Hotel Voronez IBrno; Czech Republic; 23 May 2018 до 25 May 2018; Код 142841 -
Effect of aluminum melt treatment by nanosecond electromagnetic pulses on structure and properties of castings / Deev V., Ri E., Prusov E. // 73rd World Foundry Congress “Creative Foundry”, WFC 2018 — Proceedings 2018. — Pages
155-156. 73rd World Foundry Congress: Creative Foundry, WFC 2018; Krakow; Poland; 23 September 2018 до 27 September 2018; Код 144933 -
Influence of the shape of hydrogen-containing inclusions on the intergranular corrosion process of the Al — Si alloy system / Partyko EG, Deev VB, Gubanova MI, Tolkachyova DV // Non-ferrous Metals. — Volume 45, Issue 2. — 2018. — Pages
16-21 -
Recycling Cullet from Quartz Ceramic Shells Used in Investment Casting / Leushina L., Leushin I., Plokhov S., Deev V. // Steel in Translation. — Volume 48, Issue 11. — 1 November 2018. — Pages
699-703 -
Effect of ECAP on the microstructure, mechanical and corrosion properties of Mg-Zn-Ca and Mg-Zn-Ca-Mn biodegradable alloys / Koltygin A., Bazhenov V., Komissarov A., Khasenova R., Anishchenko A., Fozilov B., Bautin V., Seferyan A., Bilyalov A. // METAL 2018 — 27th International Conference on Metallurgy and Materials, Conference Proceedings 2018. — Pages
1388-1393. 27th International Conference on Metallurgy and Materials, METAL 2018; Hotel Voronez IBrno; Czech Republic; 23 May 2018 до 25 May 2018; Код 142841 -
Prediction of Misruns in ML5 (AZ91) Alloy Casting and Alloy Fluidity Using Numerical Simulation / Petrova A., Bazhenov V., Koltygin A. // Russian Journal of Non-Ferrous Metals. — Volume 59, Issue 6. — 1 November 2018. — Pages
617-623 -
The study of granulometric composition of industrial waste for foundry / Sokorev, A.A., Mishurov, S.S., Naumova, E.A., Letyagin, N.V. // Tsvetnye Metally. — Issue 16. — 2018. — Pages
63-68 -
Microstructure, mechanical and corrosion properties of biodegradable Mg-Ga-Zn-X (X = Ca, Y, Nd) alloys / Bazhenov, V., Koltygin, A., Komissarov, A., (...), Seferyan, A., Fozilov, B. // METAL 2018 — 27th International Conference on Metallurgy and Materials, Conference Proceedings. — 2018. — Pages
1375-1380. 27th International Conference on Metallurgy and Materials, METAL 2018; Hotel Voronez IBrno; Czech Republic; 23 May 2018 до 25 May 2018; Код 142841 -
Quality of Rolled Steel for Cold Bulk Stamping / Filippov, A.A., Pachurin, G.V., Kuz’min, N.A., Matveev, Y.I., Deev, V.B. // Steel in Translation. — Volume 48, Issue 7. — 1 July 2018. — Pages
430-434
2017
-
Effect of Neodymium and Zirconium on the Structure of Castable Magnesium Alloy ML10 (NZ30K) / A. V. Koltygin, V. E. Bazhenov, A. A. Nikitina // Metal Science and Heat Treatment. — 2017. — Volume 59, — Issue
7–8, — pp422–428 (0.248) -
Effect of Iron and Magnesium on Alloy AL9M Structure and Properties / V. E. Bazhenov, A. V. Koltygin, V. D. Belov // Metal Science and Heat Treatment. — 2017. — Volume 59, — Issue
5–6, — pp346–351 (0.248) -
Simulation of the temperature distribution on the mold surface and inside casting during high-gradient directional solidification / Yu. A. Bondarenko, A. B. Echin, V. E. Bazhenov, A. V. Koltygin // Russian Journal of Non-Ferrous Metals. — 2017. — Volume 58, — Issue 5, — pp
481–488 (0.238) -
Determination of interface heat transfer coefficient between aluminum casting and graphite mold / Bazhenov, V.E., Koltygin, A.V., Tselovalnik, Y.V., Sannikov, A.V. // Russian Journal of Non-Ferrous Metals. — 2017. — Volume 58, — Issue 2, — pp
114–123 (0.238) -
Microstructure and mechanical properties of Ml10 (Nz30k) magnesium alloy which is used as raw material for the castings production / Koltygin, A.V., Bazhenov, V.E. // Tsvetnye Metally. — 2017. — Issue 7, — Pages
68-72 (0.160) -
Determination of heat transfer coefficient between az91 magnesium alloy casting and no-bake mold / Bazhenov, V.E., Petrova, A.V., Koltygin, A.V., Tselovalnik, Y.V. // Tsvetnye Metally. — 2017. — Issue 8, — Pages
89-96 (0.160) -
Glue for joints and repair of elements of graphite molds / Bazhenov, V.E., Fadeev, A.V., Koltygin, A.V., Komissarov, A.A., Sannikov, A.V. // Polymer Science, Series D. — 2017. — Volume 10, — Issue 1, — pp
4–8 (0) -
Influence of melting conditions of aluminum alloys on the properties and quality of castings obtained by lost foam casting / V. B. Deev, K. V. Ponomareva, A. I. Kutsenko, O. G. Prikhodko, S. V. Smetanyuk // Russian Journal of Non-Ferrous Metals. — 2017. — Volume 58, — Issue 5, — pp
470–474 (0.238) -
Influence of temperatures of melt overheating and pouring on the quality of aluminum alloy lost foam castings / V. B. Deev, K. V. Ponomareva, O. G. Prikhodko, S. V. Smetanyuk // Russian Journal of Non-Ferrous Metals. — 2017. — Volume 58, — Issue 4, — pp
373–377 (0.238) -
Analysis of Hydrogen Content in the Main Stages of Low-Alloy Aluminum Alloy Flat Ingot Manufacture / S. V. Belyaev, B. P. Kulikov, V. B. Deev, V. N. Baranov, E. M. Rakhuba // Metallurgist. — 2017. — Volume 61, — Issue
3–4, — pp325–329 (0.277) -
Boriding of titanium OT4 from powder saturating media / S. G. Ivanov, M. A. Guriev, M. V. Loginova, V. B. Deev, A. M. Guriev // Russian Journal of Non-Ferrous Metals. — 2017. — Volume 58, — Issue 3, — pp
244–249 (0.238) -
The effect of Cr and Zr on the structure and phase composition of TNM gamma titanium aluminide alloy / Belov, N.A., Akopyan, T.K., Belov, V.D., Gershman, J.S., Gorshenkov, M.V. // Intermetallics. — 2017. — Volume 84, — pp
121-129 (3.140) -
Damping Metallic Materials with a Nanostructured Coating / E. B. Utepov, E. B. Ten, Zh. O. Zhumadilova, G. A. Smailova, V. S. Shevtsova, R. Zh. Abuova, A. B. Isakhanova // Metallurgist. — 2017. — Volume 60, Issue
9–10, pp961–966 -
Influence of Al-5Ti-1B master alloy addition on the grain size of AZ91 alloy / Koltygin A, Bazhenov V, Mahmadiyorov U. // Journal of Magnesium and Alloys. — 2017. — Volume 5, Issue 3, Pages
313-319 -
Phase Composition and Hardening of Castable Al — Ca — Ni — Sc Alloys Containing 0.3% Sc / Belov N., Naumova E., Bazlova T., et al. // Metal Science and Heat Treatment. — 2017. — Volume 59, Issue
1–2, pp76–81 -
Effect of manganese and iron on the phase composition and microstructure of aluminum-calcium alloys / Belov N. A., Naumova E. A., Doroshenko V. V., Bazlova T. A. // Tsvetnye Metally (Non-ferrous metals). — 2017. — Issue 8, Pages
66-71 -
Using Si-doped diamond plate of sandwich type for spatial profiling of laser beam / Laptev, A. I.; Ermolaev, A. A.; Nozhkina, A. V. // Tsvetnye Metally (Non-ferrous metals). — 2017. — Issue 55 94), Pages
389-393 -
Hot-tearing susceptibility of Al—Zn alloys / V. E. Bazhenov, M. V. Pikunov, A. A. Safronova, Yu. V. Tselovalnik // Russian Metallurgy (Metally). — 2016. — Volume 2017, Issue 9, pp
711–717
2016
-
Influence of treatment of melts by electromagnetic acoustic fields on the structure and properties of alloys of the Al—Si system / I. Yu. Timoshkin, K. V. Nikitin, V. I. Nikitin, V. B. Deev // Russian Journal of Non-Ferrous Metals. — 2016. — Volume 57, Issue 5, pp
419–423 (0,238) -
Phase Composition of Light-Weight Steels and Alloys Based on the Fe—Mn—Al—C System / L.M. Kaputkina, A.G. Svyazhin, D.E. Kaputkin, V.E. Bazhenov, A.V. Bronz, I.V. Smarygin // Metallurgist. — 2015. — Volume 59, Issue
9–10, pp895–898 -
Phase composition and structure of aluminum Al—Cu—Si—Sn—Pb alloys / N. A. Belov, O. O. Stolyarova, T. I. Murav’eva, D. L. Zagorskii // The Physics of Metals and Metallography. — 2016. — Volume 117, Issue 6, pp
579–587 (0,884) -
Influence of annealing on electrical resistance and hardness of hot-rolled aluminum alloy sheets containing up to 0.5% Zr / N. A. Belov, A. M. Dostaeva, P. K. Shurkin, N. O. Korotkova, A. A. Yakovlev // Russian Journal of Non-Ferrous Metals. — 2016. — Volume 57, Issue 5, pp
429–435 (0,238) -
Influence of solidification conditions of billets of tin bronze BrO10C2N3 on its structure / V. D. Belov, E. A. Gerasimenko, V. V. Guseva, A. N. Konovalov // Russian Journal of Non-Ferrous Metals. — 2016. — Volume 57, Issue 3, pp
195–201 (0,238) -
Analysis of the Production of Ribbons of Copper-Phosphorus Solder by the Lateral Flow of a Melt onto a Rotating Roller Mold/ S. A. Tavolzhanskii, I. N. Pashkov, G. A. Aleksanyan // Metallurgist. — 2016. — Volume 59, Issue
9–10, pp843–850 (0,277) -
New Fe−Co−Ni−Cu−Al−Ti Alloy for Single-Crystal Permanent Magnets / I. V. Belyaev, V. E. Bazhenov, A. V. Moiseev, A. V. Kireev // The Physics of Metals and Metallography. — 2016. — Volume 117, Issue 3, pp
214–221 (0,884) -
Determination of the heat-transfer coefficient between the AK7ch (A356) alloy casting and no-bake mold / Bazhenov V., Koltygin A., Tselovalnik Y. // Russian Journal of Non-Ferrous Metals. — 2016. — Volume 57, Issue 7, pp
686–694 (0,238) -
Composition, Properties, Application, and Manufacturing Features of Binary Copper—Phosphorus Solders / Tavolzhanskii S., Bazhenov V., Pashkov I. // Metallurgist. — 2016. — Volume 60, Issue
7–8, pp750–757 (0,277) -
Relation between the solidification rate of a binary alloy and the alloying-element distribution coefficient / Pikunov M., Bazhenov V. // Russian Metallurgy (Metally). — 2016. — Volume 2016, Issue 7, pp
675–681 -
Effect of Mn, Al, Ni, and C content on the equilibrium phase composition of alloys based on the Fe-Mn-Al-Ni-C system / L. M. Kaputkina, A. G. Svyazhin, D. E. Kaputkin, V. E. Bazhenov, A. V. Bronz, I. V. Smarygina // Metallurgist. — 2016. — Volume 59, Issue
11–12, pp1075–1080 -
High-Strength Corrosion-Resistant Cryogenic Steel Alloyed with Nitrogen / L. M. Kaputkina, A. G. Svyazhin, I. V. Smarygina, V. E. Kindop, V. E. Bazhenov // Metallurgist. — 2016. — Volume 60, Issue
7–8, pp802–809 -
Structure, Phase Composition, and Strengthening of Cast Al-Ca-Mg-Sc alloys / Belov NA, Naumova EA, Bazlova TA, et al.// The Physics of Metals and Metallography. — 2016. — Volume 117, Issue 2, pp
188–194 (0,884) -
Optimization of the composition of silicon brass LTs16K4 with the purpose of increasing its castability when fabricating art castings / Gerasimov S., Titov A., Palachev V., et al. // Russian Journal of Non-Ferrous Metals. — 2016. — Volume 57, Issue 3, pp
211–216 (0,238) -
Nitrogen in Fe-Mn-Al-C-based steels / A. G. Svyazhin, V. E. Bazhenov, L. M. Kaputkina, I. V. Smarygina, V. E. Kindop // CIS Iron and Steel Review. — 2016. — Volume 12, pp
13-17 -
Quantitative Analysis of the Phase Composition of the Ti — Al — Mo — V — Zr System as Applied to Castable Titanium Alloy VT20L / Belov N., Bel’tyukova S., Belov V., et al. // Metal Science and Heat Treatment. — 2016. — Volume 58, Issue
3–4, pp153–158 (0,248) -
Mannesmann piercing of ingots by plugs of different shapes / Skripalenko M., Bazhenov V., Romantsev B., et al. // Materials Science and Technology. — 2016. — Volume 32, Issue 16, pp
1712-1720 (2,764)
